Specifications
VIP edition
Silver carbon chassis
Red / Silver alum. parts
2WD drive system
Front KPI alum. knuckle
Gyroscope

WHEELBASE :  STANDARD 257mm (adjustable)
WIDTH :  STANDARD 190mm (adjustable)
CAETER :  4 to 20 degrees variableness
CAMBER :  0 to -12 degrees
 

The new MST MS-01D VIP II is now available to order! The MS-01D VIP II is the top of the line in RC drifting, with 98% of our upgrades included. This new version  is available in red or silver aluminium with black or SSG slimline carbon. Avoid spending thousands of pounds on other chassis to make them do what the VIP does out of the box.

The VIP is a "no compromise" chassis, including CS gears, huge angle, massive tuning potential and very intellegent design features, making tuning fun! The VIP can also be converted to make a Luxury version of the FS-01D uising the optional front motor conversion kit.

This is the machine the other brands don't want you to have.

Scale : 1:10
Wheelbase : Standard 257mm (changeability 255mm – 259mm)
Trackwidth : Standard 186mm (changeability 186mm – 190mm)
Gear ratio : 2.0 ( 36T/18T )
Drive system : 2 belts / 4WD
Damper : Oil damper
Suspension : A arm (Double wishbone) w/pillowball suspension system
Steering tie rod : Division into three
Bearing: Full ball bearings
Caster : 4, 7, 10, 14 degrees variableness
Camber : 0 to –12 degrees

SPECIFICATION
Wheelbase : Standard 257mm (adjustable)
Width : Standard 186mm (adjustable)
Gear ratio : 2.0 (36T/18T)
CS ratio : 1.54 (40T/13T)
Caster : 4, 7, 10, 14 degrees variableness
Camber : 0 to -12 degrees
Front : Alum. one way
Rear : Spool unit

Our RTR packages have been updared to include an aluminium one way front diff, 1.54 and carbon look top decks! Exta optional parts at no additional cost!

The MST MS-01D RTR kits mean everyone can enjoy RC Drifting, without having to get stressed out about which chassis and electrics they should use. Unlike most "ready to run" packegs out there, our package offers you the same key features as expected from every other MST chassis and the same ability to upgrade and tune all the way to VIP specs! So even at entry level, with a bit of practice, you can be running CS (CS kit available seperately), big angle and twin drifting within no time!

Featuring a 2.4Ghz controller system and a motor / esc combo, all you need to do is supply the batteries. The electrics in these cars are more than enough to get sideways and stay there. Don't be fooled by other cheap RTRs, we take our fun very seriously!

The MS-01D RTR is a robust, easy to maintain machine that includes a genuine, pre-painted Tamiya body as part of the kit.

Scale : 1:10
Wheelbase : Standard 257mm (changeability 255mm – 259mm)
Trackwidth : Standard 186mm (changeability 186mm – 190mm)
Gear ratio : 2.0 ( 36T/18T )
Drive system : 2 belts / 4WD
Damper : Oil filled dampers
Suspension : A arm (Double wishbone) w/pillowball suspension system
Steering tie rod : Division into three
Bearing: Full ball bearings
Caster : 4, 7, 10, 14 degrees adjustment
Camber : 0 to –12 degrees adjustment

Features:

• 95% Pre-assembled chassis. Just grease your drive shafts and attach a few parts then you're up and running!
• Pre-painted genuine Tamiya body
• Carbon Fibre look top decks
• Strong "flex" lower chassis design
• Front one way diff
• Rear spool unit
• Steel front CVD and rear CVA drive shafts
• Full ball bearing set
• Oil-filled dampers front and rear (oil sold separately)
• 2 belt drive system
• Includes wheels and tyres!

Our RTR packages have been updared to include an aluminium one way front diff, 1.54 and carbon look top decks! Exta optional parts at no additional cost!

The MST MS-01D RTR kits mean everyone can enjoy RC Drifting, without having to get stressed out about which chassis and electrics they should use. Unlike most "ready to run" packegs out there, our package offers you the same key features as expected from every other MST chassis and the same ability to upgrade and tune all the way to VIP specs! So even at entry level, with a bit of practice, you can be running CS (CS kit available seperately), big angle and twin drifting within no time!

Featuring a 2.4Ghz controller system and a motor / esc combo, all you need to do is supply the batteries. The electrics in these cars are more than enough to get sideways and stay there. Don't be fooled by other cheap RTRs, we take our fun very seriously!

The MS-01D RTR is a robust, easy to maintain machine that includes a genuine, pre-painted Tamiya body as part of the kit.

Scale : 1:10
Wheelbase : Standard 257mm (changeability 255mm – 259mm)
Trackwidth : Standard 186mm (changeability 186mm – 190mm)
Gear ratio : 2.0 ( 36T/18T )
Drive system : 2 belts / 4WD
Damper : Oil filled dampers
Suspension : A arm (Double wishbone) w/pillowball suspension system
Steering tie rod : Division into three
Bearing: Full ball bearings
Caster : 4, 7, 10, 14 degrees adjustment
Camber : 0 to –12 degrees adjustment

Features:

• 95% Pre-assembled chassis.Just grease your drive shafts and attach a few parts then you're up and running!
• Pre-painted genuine Tamiya body
• Carbon Fibre look top decks
• Strong "flex" lower chassis design
• Front one way diff
• Rear spool unit
• Steel front CVD and rear CVA drive shafts
• Full ball bearing set
• Oil-filled dampers front and rear (oil sold separately)
• 2 belt drive system
• Includes wheels and tyres!

Our RTR packages have been updared to include an aluminium one way front diff, 1.54 and carbon look top decks! Exta optional parts at no additional cost!

The MST MS-01D RTR kits mean everyone can enjoy RC Drifting, without having to get stressed out about which chassis and electrics they should use. Unlike most "ready to run" packegs out there, our package offers you the same key features as expected from every other MST chassis and the same ability to upgrade and tune all the way to VIP specs! So even at entry level, with a bit of practice, you can be running CS (CS kit available seperately), big angle and twin drifting within no time!

Featuring a 2.4Ghz controller system and a motor / esc combo, all you need to do is supply the batteries. The electrics in these cars are more than enough to get sideways and stay there. Don't be fooled by other cheap RTRs, we take our fun very seriously!

The MS-01D RTR is a robust, easy to maintain machine that includes a genuine, pre-painted Tamiya body as part of the kit.

Scale : 1:10
Wheelbase : Standard 257mm (changeability 255mm – 259mm)
Trackwidth : Standard 186mm (changeability 186mm – 190mm)
Gear ratio : 2.0 ( 36T/18T )
Drive system : 2 belts / 4WD
Damper : Oil filled dampers
Suspension : A arm (Double wishbone) w/pillowball suspension system
Steering tie rod : Division into three
Bearing: Full ball bearings
Caster : 4, 7, 10, 14 degrees adjustment
Camber : 0 to –12 degrees adjustment

Features:

• 95% Pre-assembled chassis. Just grease your drive shafts and attach a few parts then you're up and running!
• Pre-painted genuine Tamiya body
• Carbon Fibre look top decks
• Strong "flex" lower chassis design
• Front one way diff
• Rear spool unit
• Steel front CVD and rear CVA drive shafts
• Full ball bearing set
• Oil-filled dampers front and rear (oil sold separately)
• 2 belt drive system
• Includes wheels and tyres!

Our RTR packages have been updared to include an aluminium one way front diff, 1.54 and carbon look top decks! Exta optional parts at no additional cost!

The MST MS-01D RTR kits mean everyone can enjoy RC Drifting, without having to get stressed out about which chassis and electrics they should use. Unlike most "ready to run" packegs out there, our package offers you the same key features as expected from every other MST chassis and the same ability to upgrade and tune all the way to VIP specs! So even at entry level, with a bit of practice, you can be running CS (CS kit available seperately), big angle and twin drifting within no time!

Featuring a 2.4Ghz controller system and a motor / esc combo, all you need to do is supply the batteries. The electrics in these cars are more than enough to get sideways and stay there. Don't be fooled by other cheap RTRs, we take our fun very seriously!

The MS-01D RTR is a robust, easy to maintain machine that includes a genuine, pre-painted Tamiya body as part of the kit.

Scale : 1:10
Wheelbase : Standard 257mm (changeability 255mm – 259mm)
Trackwidth : Standard 186mm (changeability 186mm – 190mm)
Gear ratio : 2.0 ( 36T/18T )
Drive system : 2 belts / 4WD
Damper : Oil filled dampers
Suspension : A arm (Double wishbone) w/pillowball suspension system
Steering tie rod : Division into three
Bearing: Full ball bearings
Caster : 4, 7, 10, 14 degrees adjustment
Camber : 0 to –12 degrees adjustment

Features:

• 95% Pre-assembled chassis. Just grease your drive shafts and attach a few parts then you're up and running!
• Pre-painted genuine Tamiya body
• Carbon Fibre look top decks
• Strong "flex" lower chassis design
• Front one way diff
• Rear spool unit
• Steel front CVD and rear CVA drive shafts
• Full ball bearing set
• Oil-filled dampers front and rear (oil sold separately)
• 2 belt drive system
• Includes wheels and tyres!